Port Configuration - EverFocus VANGUARD 4x2H User Manual

4.4.1.3 Port Configuration

On this page, you can configure the port settings or enable/disable the UPnP or P2P function.
Web Port: The Web port can be used to remotely login the DVR (e.g. using the Web Client).
If the default port 80 is already taken by other applications, please change it.
Client Port: The Client port can be used to send information through (e.g. using the mobile
app). If the default port 9000 is already taken by other applications, please change it.
RTSP Port: The RTSP port allows the DVR to transmit real-time streaming to other devices
(e.g. using a streaming media player).
UPnP: If you want to remotely login the DVR using Web Client, you need to enable the UPnP
function and also enable the Port Forwarding function on your router.
Note:
1. For the UPnP function to work, an UPnP-enabled router is required.
2. If your router does not support UPnP, ensure the Port Forwarding function is manually
enabled on your router.
P2P Switch: Check the box to enable the P2P function. If P2P function is enabled, a QR code
will be displayed on the System Info page. You can scan the QR code with EverFocus
VANGUARD App installed on your mobile device to add and remote access the DVR. Please
refer to 4.6.5.1.1 Performing the P2P Function.
Default: Click to apply the default setting.
Apply: Click to save the settings.
H.265 VANGUARD 4x2H / 8x4H / 16x8H
111