Table of Contents
Advertisement
1.4 Front Panel
1 2
8
No.
Name
Reset Tact
1.
Switch
2.
Power Button
3.
CFast Card
WLAN LED,
Mini PCIe,
4.
SIM Card
Comparison
PWR & HDD
5.
LED Indicator
6.
DisplayPort
DVI-D
7.
Connector
DVI-I
8.
Connector
3
5
4
Description
It is a hardware reset switch. Use this switch to reset the system
without powering off the system. Press the Reset Switch for a few
seconds, and then reset will be enabled.
Press the button to turn on or turn off the system. For more details,
please refer to 1.4.1 Power Button.
The eIVP-CFS-IV-V0004 does not support the CFast hot swap. Be sure to
disconnect the power source and unscrew the CFast socket cover
before installing a CFast card. For more details, please refer to 1.4.2
CFast Card.
The SIM card sockets do not support hot-plug. Please make sure to
unplug the system power before inserting the SIM card(s). For more
details, please refer to 1.4.3 WLAN LED, Mini PCIe, SIM Card
Comparison.
HDD LED/Yellow : A Hard Disk/CFast LED. If the LED is on, it indicates
that the system's storage is functional. If it is off, it indicates that the
system's storage is not functional. If it is flashing, it indicates that data
access activities. For more details, please refer to 1.4.4 PWR & HDD LED
Indicator.
Onboard Display Port supports up to 4096x2304 resolution at 60Hz.
You can use the DVI-D connector on the front panel to connect to a
display device. The DVI-D supports 1920 x 1200 resolution output. You
will need a DVI-D cable when connecting to a display device.
You can use the DVI-I connector to connect to a display device. The DVI-
I supports 1920 x 1200 resolution output. You will need a DVI-I cable
when connecting to a display device. You can optionally use a DVI-I to
VGA cable/connector if you want to connect to a VGA display device.
6
7
9
3
eIVP-CFS-IV-V0004
10
11
12
Advertisement
Table of Contents
