EverFocus eIVP-CFS-IV-V0004 User Manual page 3

Please read the following safety instructions carefully. It is advised that you keep this
manual for future references.
 All cautions and warnings on the device should be noted.
 All cables and adapters supplied by EverFocus are certified and in accordance with the
material safety laws and regulations of the country of sale. Do not use any cables or
adapters not supplied by EverFocus to prevent system malfunction or fires.
 Make sure the power source matches the power rating of the device.
 Position the power cord so that people cannot step on it. Do not place anything over
the power cord.
 Always completely disconnect the power before working on the system's hardware.
 No connections should be made when the system is powered as a sudden rush of
power may damage sensitive electronic components.
 If the device is not to be used for a long time, disconnect it from the power supply to
avoid damage by transient over-voltage.
 Always disconnect this device from any AC supply before cleaning.
 While cleaning, use a damp cloth instead of liquid or spray detergents.
 Make sure the device is installed near a power outlet and is easily accessible.
 Keep this device away from humidity.
 Place the device on a solid surface during installation to prevent falls.
 Do not cover the openings on the device to ensure optimal heat dissipation.
 Watch out for high temperatures when the system is running.
 Do not touch the heat sink or heat spreader when the system is running.
 Never pour any liquid into the openings. This could cause fire or electric shock.
 As most electronic components are sensitive to static electrical charge, be sure to
ground yourself to prevent static charge when installing the internal components. Use a
grounding wrist strap and contain all electronic components in any static-shielded
containers.
 If any of the following situations arises, please contact our service personnel
(ts@everfocus.com.tw):
- Damaged power cord or plug
- Liquid intrusion to the device
- Exposure to moisture
- Device is not working as expected or in a manner as described in this manual
- The device is dropped or damaged
- Any obvious signs of damage displayed on the device
 DO NOT LEAVE THIS DEVICE IN AN UNCONTROLLED ENVIRONMENT WITH
TEMPERATURES BEYOND THE DEVICE'S PERMITTED STORAGE TEMPERATURES (SEE
SPECIFICATION) TO PREVENT DAMAGE.
Safety Precautions
ii
eIVP-CFS-IV-V0004