Table of Contents
Advertisement
4.3.2.2 GT – Power Management Control
RC6 (Render Standby)
Check to enable render standby support.
Maximum GT frequency
Maximum GT frequency is limited by the user. Choose between 350MHz (RPN) and 1150MHz
(RP0). Value beyond the range will be clopped to min/max supported by SKU
Disable Turbo GT frequency
Check to enable render standby support.
4.3.3 PCH-FW Configuration
ME State
Set ME to Soft temporarily disabled.
AMT BIOS Features
When disable AMT BIOS Features, they will be no longer supported and user is no longer able
to access MEBx Setup.
AMT Configuration
Configure Intel® Active Management Technology Parameters.
ME Unconfig on RTC Clear State
Disabling this option will cause ME not to unconfigure on RTC clear.
Figure 4-3-2-2: GT-Power Management Control
Figure 4-3-3: PCH-FW Settings
42
eIVP-CFS-IV-V0004
Advertisement
Table of Contents
