Table of Contents
Advertisement
1.5.1 PoE Ports
There are 4 RJ45 connectors in the rear side. It supports IEEE 802.3 at (PoE+) Power over Ethernet
(PoE) connection delivering up to 37W/54V per port and 1000 BASE-T gigabit data signals over
standard Ethernet Cat 5/Cat 6 cable.
Each PoE connection is powered by Intel® I210 Gigabit Ethernet controller and independent PCI
express interface to connect with multi-core processor for network and data transmit optimization.
Only when PoE port starts to supply power to power devices, the dedicated LED will be lightened.
PS. Suggest to use PoE function when power input is over 12V.
The pin-outs of LAN 3 and LAN 6 are listed as follows:
Pin No.
10/100Mbps
1
E_TX+
2
E_TX-
3
E_RX+
4
-----
5
-----
6
E_RX-
7
-----
8
------
Each LAN port is supported by standard RJ-45 connector with LED indicators to present
Active/Link/Speed status of the connection.
The LED indicator on the right bottom corner lightens in solid green when the cable is properly
connected to a 100 Mbps Ethernet network; The LED indicator on the right bottom corner lightens in
solid orange when the cable is properly connected to a 1000 Mbps Ethernet network; The left LED
will keep twinkling/off when Ethernet data packets are being transmitted/received.
LED
LED Color
Location
Green/
Right
Orange
Left
Yellow
POE LED
LED 3-6
1.5.2 Serial Port
Serial port 1 to 4 (COM 1 to 4) can be configured for RS-232, RS-422, or RS-485 with auto flow control
communication. The default definition of COM 1 and COM 2 is RS-232. If you want to change to RS-
422 or RS-485, you can find the setting in BIOS.
BIOS Setting
COM 1
1000Mbps
MDI0_P
MDI0_N
MDI1_P
MDI2_P
MDI2_N
MDI1_N
MDI3_P
MDI3_N
10Mbps
100Mbps
Off
Solid Green
Twinkling
Twinkling
Yellow
Yellow
LED Color
Solid Green
Function
RS-232
RS-422 (5-wire)
PoE
PoE+
PoE+
PoE-
-----
-----
PoE-
-----
-----
1000Mbps
Solid
Orange
Twinkling
Yellow
POE Status
POE ON
8
eIVP-CFS-IV-V0004
1
8
Advertisement
Table of Contents
