EverFocus eIVP-CFS-IV-V0004 User Manual page 13

1.4.4 PWR & HDD LED Indicator
Power LED/Green: If the LED is solid green, it indicates that the system is powered on.
LED Color Indication
Yellow HDD/CFast
Green Power
1.4.5 Ethernet Port
There are 2 8-pin RJ-45 jacks supporting 10/100/1000 Mbps Ethernet connections in the front side.
LAN 1 is powered by Intel® i219 Ethernet Phy; LAN 2 is powered by Intel® I210 Ethernet engine.
When both LAN 1 and LAN 2 work in normal status, iAMT 12.0 function is enabled.
Using suitable RJ-45 cable, you can connect the system to a computer, or to any other devices with
Ethernet connection, such as hubs and switches. Moreover, both of LAN 1 and LAN 2 support Wake
on LAN and Pre-boot functions. The pin-outs of LAN 1 and LAN 2 are listed as follows:
Pin No. 10/100Mbps
1
E_TX+
2
E_TX-
3
E_RX+
4
-----
5
-----
6
E_RX-
7
-----
8
------
Each LAN port is supported by standard RJ-45 connector with LED indicators to present
Active/Link/Speed status of the connection.
The LED indicator on the right bottom corner lightens in solid green when the cable is properly
connected to a 100Mbps Ethernet network; The LED indicator on the right bottom corner lightens in
solid orange when the cable is properly connected to a 1000Mbps Ethernet network; The left LED will
keep twinkling/off when Ethernet data packets are being transmitted/received.
System Status
• On/Off: Storage status, function or not.
• Twinkling: Data transferring.
System power status (on/off)
1000Mbps
MDI0_P
MDI0_N
MDI1_P
MDI2_P
MDI2_N
MDI1_N
MDI3_P
MDI3_N
6
eIVP-CFS-IV-V0004