Device; General - Fermax NEO MEET Installer Manual

Hide thumbs Also See for NEO MEET:

Table of Contents

5.1. DEVICE

Provides some technical information regarding the equipment, as a reference.

Allows the configuration of the identification parameters of the monitor within the

installation.

• BLOCK: Block number of the apartment where the monitor is installed. 3 digits

(001-009).

• APART: Number of the apartment where the monitor is installed. 4 digits (0001-9899).

• MONITOR: Number (from 0 to 9) assigned to each of the monitors installed in the

same apartment, if there are several. If there is only one, leave the default value "0".

• DEVICE TAG: Name that will be shown in the monitor when the function INTERCOM

is being used.

• SYNC CODE: Synchronisation code with the rest of the monitors installed in the

same apartment. It has to be the same in all of them. Default is 123456.

• NUMBER OF CONCIERGES: Choose between 0 and 9 the number of concierges

that will be available for this monitor. Depending on the selected number, some

additional fields, to identify the corresponding concierges will appear below.

• CONCIERGE X: Select the GU number to call.

• TAG: Name that will be shown in the monitor when a call to concierge is being made.

NEO MEET INSTALLER MANUAL

• FIRMWARE: Version of the

installed firmware.

• DEVICE: Block,

No., Monitor No.

• MAC: Monitor MAC number.

• IP: IP address assigned to the

monitor.

Apartment

Table of Contents