Table of Contents
Advertisement
ANEXO
6.1. FIRMWARE UPDATES
Sometimes it may be necessary or convenient to update a new firmware version because
improvements or corrections have been incorporated into its operation.
FERMAX's Technical Department periodically informs (through Communications,
Technical Bulletins, etc.) about the release of a new firmware update, as well as the
improvements incorporated.
Contact the FERMAX Technical Department if you wish to receive the corresponding
update file.
The firmware update is performed via the MEET System Upgraded Tool V 1.2.exe.
The procedure for updating the firmware with the corresponding update file is as follows.
It is possible to update several panels at the same time, selecting the range of the
corresponding IP addresses (all of them have to be sequential).
1. Start the MEET System Upgraded Tool V 1.2.exe.
2. Click on "..." button and browse the PC to find the corresponding .IMG update
file.
Up to 3 .IMG files can be selected at the same time (for the case of the update
has more than unique .IMG file).
3. Indicate the IP Range of the panels.
4. Select Upgrade.
The new firmware will be installed, and the monitor will automatically restart.
22
NEO MEET INSTALLER MANUAL
Advertisement
Table of Contents
