Table of Contents
Advertisement
In the case of the selected function ICONS are less than 8 the rest will be blank.
4.6. CHANGE INSTALLER PIN
To access the INSTALLER MENU you must identify yourself using an INSTALLER PIN,
which by default is 6666.
We advise you to change it for another of your choice. The new code must be 4 digits
long. See NOTES
Touch the icon
to change the INSTALLER PIN.
Use the numeric keypad to identify yourself with the current PIN and enter the new PIN.
Confirmation of the new PIN is requested for security purposes.
NOTES
If the INSTALLER PIN is changed via WEB browser it can be longer and contain
alphanumeric characters (See section 5.8 PIN CODE). But in that case it cannot be
used to access the configuration from the monitor itself.
Make a note of the new PIN at your convenience. If you lose or forget your PIN, you
should contact FERMAX's Technical Department to receive instructions regarding its
recovery. All the monitor programming will be lost.
14
NEO MEET INSTALLER MANUAL
Advertisement
Table of Contents
