Advanced - Fermax NEO MEET Installer Manual

• CONVERSATION: Indicate the maximum conversation time in communications with
SIP protocol.
NOTE:
The MEET monitor must be registered with the corresponding SIP server.
Contact the server administrator for the necessary configuration data.

5.6. ADVANCED

The MEET monitors allow you to divert the calls to other devices such as:
• Smartphones (via MEET ME App)
• SIP devices
But the most common application is to divert the call to the MEET ME App.
SIP EXT.: Use this drop-down to set up call forwarding from this monitor to other
devices (NONE, 1, 2, 3 or 4). The form will be automatically adapted depending on
the number chosen.
Indicate the URL or URLs of the devices to which the calls will be forwarded. These
URLs must have one of these formats:
• sip: meetme_licensenumber@sip.fermax.com, in case of call divert to mobile
using the MEET ME App, where meetme_licensenumber corresponds to the
MEET ME username on the sticker of the monitor and used to configure the
MEET ME App on the smartphone.
• sip:XXX@ip_address, in the case of forwarding to MEET monitors in the
installation, where XXX is the device number and ip_address is the IP address
of that device.
• sip: extension@server_sip, in case of forwarding to a third party SIP device
registered into a SIP Server, where extension is the extension number of that
SIP device and where server_sip could be either the IP address of the SIP
server or the domain name of the SIP server.
DTMF UNLOCK: Generally, panels using SIP protocol require a number or combination
of DTMF numbers to activate the associated door opener.
NEO MEET INSTALLER MANUA
19