EAS Electric EMV72PGN Instruction Manual page 67

After cleaning, the guard must be replaced in accordance with instructions.
Notes
1. During the pyrolytic mode, the frame on the inside of the appliance may discolour.
This is normal and does not affect performance. The discolouration can be removed
with the help of stainless-steel cleaning agent.
2. Bad soiling may cause white deposits to remain on the enamel surfaces. This is
residues from the food and is harmless. It does not affect performance. You can
remove these residues using lemon juice or other kinds of cleaning agents if needed.
Removing the appliance door
Open the appliance door fully.
1.
Fold open the two locking levers on the left and right
2.
Close the appliance door as far as the limit stop.
3.
With both hands, grip the door on the left- and right-hand side, and pull it out
4.
upwards.
25 V.1