EAS Electric EMV72PGN Instruction Manual page 72

Warning – Risk of injury!
If the hinges are not locked, they can snap shut with great force. Ensure that the
1.
locking levers are always fully closed or, when detaching the appliance door, fully
open. The hinges on the appliance door move when opening and closing the door,
2.
and you may be trapped. Keep your hands away from the hinges.
Change the power cord
Position A show the terminal box position on the back of the back outer case and it's
closed.
Steps: a. cut off the power, use small flat screwdriver to open two snap 1, 2.
b. use Phillips screwdriver to take off screws 3, 4, 5 and 6.
c. change the new power cord, fix the yellow/green wire on 3, brother wire on 4,
blue wire on 5.
d. twist screw 6 closed the terminal box cover finish the changing.
A
back outer case
brown {L}
power cord
30
1 2
yellow/green
blue {N}
4
3
5
6
terminal box
V.1