Confirmation Of Usb Driver Installation; Figure 19: Windows Xp Logo Testing (Windows Xp); Figure 20: Usb Driver Installation Completion (Windows Xp) - NEC 78K0 User Manual

78K0 - Shine It!
Click.
6. After the installation of the USB driver is completed the window below is displayed. Click
Finish to close the hardware wizard.

5.6 Confirmation of USB Driver Installation

After installing the USB driver, check that the driver has been installed normally, according to
the procedure below. When using the EV-K0-HCD board the "NEC Electronics Starter Kit
Virtual UART" should be present like in the figure below.
Please check in the Windows "Device Manager" within the Windows Properties ("Hardware"
tab), that the driver is installed normally.

Figure 19: Windows XP Logo Testing (Windows XP)

Figure 20: USB Driver Installation Completion (Windows XP)

User's Manual U19610EE3V0UM00
Click.
27