78K0 - Shine It!
11.
Enable the check box for "Send line ends with line feeds" and "Echo typed characters
locally". Next click OK to close the ASCII Setup window.
12.
Click OK to exit the communication port properties.
13.
Type "1,wd,100" and hit the Enter key in HyperTerminal. Make sure to type it correctly
and that you don't use the backspace key if you mistyped. If you mistyped hit the enter key
to re-enter the command.
14.
The red LED should light up with this command.
Figure 48: Microsoft HyperTerminal ASCII settings (2/2)
Figure 49: Microsoft HyperTerminal Command Window
User's Manual U19610EE3V0UM00
43