Iar Systems Embedded Workbench For 78K Installation; Device File Package Of Μpd78F8024 For Iar Embedded Workbench Installation; Writeez3 Installation; Usb Driver Installation - NEC 78K0 User Manual

78K0 - Shine It!

5.2 IAR Systems Embedded Workbench for 78K installation

To install the IAR Systems Embedded Workbench for 78K including C-SPY debugger / simulator press the
regarding button from the Autorun of the CDROM provided within the Shine it! package. The setup dialogues
will guide you through the installation process. The installation can also be started by executing the
Autorun.exe program in the directory "\IAR Embedded Workbench\" of the CDROM. For further
information about the IAR Embedded Workbench installation refer to the InstallationGuide.ENU.pdf
in the directory of the CDROM.
Note: Please make sure to install the device file package of the µPD78F8024 for the IAR Embedded
Workbench, as explained below, before using the Applilet EZ for code generation and
download to the target device.
5.3 Device file package of µPD78F8024 for IAR Embedded Workbench installation
To install the device file package of the µPD78F8024 for the IAR Embedded Workbench just press the
regarding button from the Autorun of the CD-ROM provided within the Shine it! package. The setup
dialogues will guide you through the installation process. The installation can also be started by executing
the dev_install.exe in the directory "\Device file package" of the CDROM.

5.4 WriteEZ3 installation

To install WriteEZ3 for the IAR Embedded Workbench just press the regarding button from the Autorun of
the CD-ROM provided within the Shine it! package. The setup dialogues will guide you through the
installation process. The installation can also be started by executing the setup.exe in the
directory "\WRITEEZ3" of the CDROM.

5.5 USB Driver Installation

In order to use the EV-K0-HCD board the USB driver needs to be installed on the host machine. Install the
driver according to the following procedure:

Installation on Windows 2000

Installation on Windows XP
5.5.1 Installation on Windows 2000
1. When the EV-K0-HCD board is connected with the host machine, the board is recognized
by <Plug and Play>, and the wizard for finding new hardware is started. Click Next>.
Page 21
Page 25

Figure 7: Found New Hardware Wizard (Windows 2000)

User's Manual U19610EE3V0UM00
Click.
21