Installing The Driver - NEC N8803-034 User Manual

Mate the other end of the cable connector and the Fibre Channel device firmly in the
5.
correct direction.
Important
Check
Plug the power cord of the Fibre Channel device into the electrical outlet. For detailed
6.
information, please refer to the user's manual of the Fibre Channel device.
Plug the power cord of the computer into the electrical outlet.
7.

4-5. Installing the Driver

It is necessary to install the Fibre Channel driver corresponding to each operating system to use
this product. Please refer to "User's guide" of the computer.
Do not connect this product to a computer or Fibre Channel device that is
not recommended by NEC Corporation. If the product is connected to a computer
or Fibre Channel device that is not recommended by NEC Corporation, the
product may malfunction or fail.
Please contact the retailer or service center for the information on
recommended computers, Fibre Channel devices, or Fibre Channel cables.
Please refer to the user's manual of the product for information on how to
setting Fibre Channel device.
- 38 -