Using The Applilet Ez For Hcd Controller; Exercise 1 - Applilet Ez For Hcd Controller Settings; Figure 22: Applilet Ez For Hcd Controller Main Window; Figure 23: Applilet Ez For Hcd Controller Setting - NEC 78K0 User Manual

Hide thumbs Also See for 78K0:

Table of Contents

78K0 - Shine It!

7. Using the Applilet EZ for HCD Controller

In the following chapter the different functionalities will be explained in short exercises. Exercise 1 and 2 can

be used as short quick start example to light up the LEDs mounted to the EV-K0-HCD board. The exercise 3

to 5 will give a further description of the possibilities in usage of the Applilet EZ for HCD Controller.

7.1 Exercise 1 – Applilet EZ for HCD Controller settings

This exercise will go through the Applilet EZ for HCD controller's general settings.

Open the Applilet EZ EZ for HCD. Click Start → All Programs → Applilet EZ for HCD →

AppEzHCD.

Under the Project menu all of the MCU settings will be listed for configuration. Select CPU.

User's Manual U19610EE3V0UM00

Table of Contents