78K0 - Shine It!
•
RS-232 interface
•
RS-485/DMX-512 interface
•
Expansion IO connector
•
On-board temperature sensor
•
On-board ambient light sensor
•
DIP switch for board configurations
•
Reset switch for uPD78F8024 device reset
1.3 System requirements
HOST PC
A PC supporting Windows 2000, Windows XP or Windows Vista is
required for the IAR Systems Embedded Workbench demo-version.
A Pentium processor with at least 1 GHz CPU performance, with at least
256 Mbytes of RAM, allowing you to fully utilize and take advantage of the
product features. 500 Mbytes of free disk space and an additional 10
Mbytes of free disk space on the Windows system drive.
A web browser and Adobe Acrobat Reader to be able to access all the
product documentation.
Host interface
USB interface that enables communication based on USB (Ver1.1 or
later)
Note:
Updates of the IAR Embedded Workbench for 78K, documentation and/or utilities for the Shine
it! Starter Kit, if available, may be downloaded from the NEC WEB page(s) at
http://www.eu.necel.com/SHINEIT
1.4 Trademarks
IAR Embedded Workbench, visualSTATE, IAR MakeApp and C-SPY are registered trademarks of IAR
Systems AB. Microsoft, Windows and HyperTerminal are registered trademarks of Microsoft Corporation.
Adobe and Acrobat Reader are registered trademarks of Adobe Systems Incorporated.
All other product names are trademarks or registered trademarks of their respective owners.
User's Manual U19610EE3V0UM00
12