Shine It! Installation And Operation; Getting Started; Cd-Rom Contents; Pre-Programmed Demo-Application - NEC 78K0 User Manual

78K0 - Shine It!

3. Shine it! installation and operation

3.1 Getting started

The Applilet EZ for HCD Controller allows a GUI based program building and downloading application
programs to the EV-K0-HCD board. Therefore it is necessary to have a valid IAR Embedded Workbench
for 78K installation on the PC host system. As communication interface between the PC host system and
the EV-K0-HCD board a standard USB interface line is needed. Before you can download and run a
program, software and hardware have to be installed properly.

3.2 CD-ROM contents

The CD-ROM shows following directory structure:
Shine It!
Acrobat
Applilet
Device file package
Doc
dotnet
Driver
IAR Embedded Workbench
samplehex
WriteEZ3

3.3 Pre-programmed Demo-Application

The EV-K0-HCD board is pre-programmed with a demonstration code that cyclically dims the four on-board
high-power LEDs. To run the demo application, make sure that the DIP switch SW1-1 is set to ON when
connecting the power supply or the USB cable to the EV-K0-HCD board.
Table 6: Shine it! CD-ROM directory
User's Manual U19610EE3V0UM00
CD-ROM ROOT
- Acrobat Reader for 32Bit Windows OS
- Applilet EZ for HCD controller
- µPD78F8024 Device file package
- Documentation
- Microsoft dotnet package
- EV-K0-HCD driver files
- IAR Embedded Workbench for 78K
- Example program for the Shine it! Starter Kit
- Flash Programmer WriteEZ3 incl. PRM file for
µPD78F8024
structure
19