Selection And Installation Of Bracket - NEC N8190-158 User Manual

4-1. Selection and Installation of Bracket

A standard bracket is installed on this product. When fixing this product to a PCI slot optimized for
the low profile type, replace the bracket with the attached low profile one. The procedure is as
follows.
.
Remove the two SFP+ modules temporarily.
.
Remove the two screws and remove the bracket from this product.
Exchange of a bracket uses the minus screwdriver suitable for the size of a screw.
Remove the dust cover and pull down the lever of the SFP+ module to release the
lock, and then pull the SFP+ module to remove.