4-1. Selection and Installation of Bracket
A standard type bracket is installed on this product. When fixing this product to a PCI slot
optimized for the low profile type, replace the bracket with the attached standard one. The
procedure is as follows.
Hint
1.
Remove the two screws.
2.
Remove the bracket from this product.
3.
Install the low profile bracket to this product.
4.
Tighten the two screws.
Hint
Important
Exchange of a bracket uses the minus screwdriver suitable for the size of a
screw.
Follow the same procedure when the standard bracket is replaced with the low
profile bracket.
③
Make sure to keep the removed bracket carefully.
①
②
④
- 34 -