2.2.6 USB 2.0 Port
The RCS-7000 series comes with 2 USB 2.0 hosts on the front panel. The USB
interface supports Plug and Play, which enables you to connect or disconnect a
device whenever you want, without turning off the system.
The hosts can be used for an external flash disk or hard drive for storing large
amounts of data. You can also use these USB hosts to connect to a keyboard
or a mouse. The following diagram shows the pinouts for USB1 and USB2 port.
Pin No.
USB1
USB2
©Vecow RCS-7000 Series Robust Computing System User Manual
COM 4
DVI-D
V -
V+
VGA
On | Off
1
1
+5V
+5V
COM 3
Isolated
DIO 2
2
| LAN 2
1
2
3
4
2
USB1-
USB2-
GETTING TO KNOW YOUR RCS-7000
Isolated
DIO 1
Reset
| LAN 1
COM 2
COM 1
3
USB1+
USB2+
4
GND
GND
24