Vga Connector; Dual Hdmi Connectors; Triple Usb 3.0 Ports - Vecow ABP-2000 User Manual

the right bottom corners glow a solid green color when
the cable is properly connected to a 100 Mbps Ethernet
network. The LED indicator on the left bottom corner
will flash on and off when Ethernet packets are being
transmitted or received.
The LED indicators on the right bottom corners glow a
solid orange color when the cable is properly connected
to a 1000 Mbps Ethernet network. The LED indicator on
the left bottom corner will flash on and off when Ethernet
packets are being transmitted or received.
Location
Right Bottom
LED
Left Bottom
LED

2.2.5 VGA Connector

The ABP-2000 series comes with a DB15 female
connector on the front panel to connect a VGA monitor.
To ensure that the monitor image remains clear, be
sure to tighten the monitor cable after connecting it to
the ABP-2000. The VGA output mode supports up to
2560x1600 resolutions. The pin assignments of the
VGA connector are shown below.
©Vecow ABP-2000 Series Advanced Box PC User Manual
1 8
10 Mbps 100 Mbps 1000 Mbps
off Solid Green Solid
Orange
Flash Yellow Flash Yellow Flash Yellow
Pin Description
No.
1 Red Color Signal
2 Green Color Signal
3 Blue Color Signal
4 NC
5
5 Ground
10
6 VGA Detect
15
Getting to Know Your ABP-2000
1
6
11
12
Pin Description
No.
7 Ground
8 Ground
9 VCC
10 Ground
11 NC
12 DDC-DATA
13 H-Sync.
14 V-Sync.
15 DDC-CLK

2.2.6 Dual HDMI Connectors

Each HDMI output mode supports up to 2560x1600
resolutions. The HDMI mode is automatically selected
according to the display device connected.

2.2.7 Triple USB 3.0 Ports

The ABP-2000 series comes with 3 USB 3.0 hosts
on the front panel. These USB 3.0 ports allow data
transfers up to 5 Gb/s. The controller supports
SuperSpeed (SS), high-speed (HS), full-speed (FS) and
low-speed (LS) traffic on the bus.
Getting to Know Your ABP-2000
13