Hygropin
2. Preparation
Procedure :
Make sure you identify the serial number of the instrument before you start disassembling. You
may need this information later. The serial number can be found on :
back of the instrument
3. Disassembling
3.1 Housing
1
2
Doc: 820 78 004E
Rev: 02
© Copyright 2017, Proceq SA, CH-8603 Schwerzenbach
Service Manual & Repair Guide
Device info screen
Attention :
Before opening the housing, remove the battery.
Tool :
1
Screw Driver Crosshead Small
Procedure :
Unscrew the 2 screws from the housing base.
Material :
1
Housing Cover incl. PCB
1
Housing Base
1
Battery Drawer
2
Crosshead Screws
Check Serial Number
Opening the Hygropin
Components list
Page 4/14
Working copy if printed