Housing - Proceq Hygropin Service Manual & Repair Manual

5.2 Housing

1
2
Doc: 820 78 004E Rev: 03
© Copyright 2017, Proceq SA, CH-8603 Schwerzenbach
Filename: 20171204 Service & Repair Guide Hygropin v03.docx
Material :
1 Housing Cover incl. PCB
1 Housing Base
1 Battery Drawer
2 Sealing Strip
2 Screw Crosshead for Housing
8 Silicon Cap for USB
Procedure :
Place the sealing strips on both sides of the hous-
ing cover.
Make sure the battery drawer is positioned similar
as on the picture.
Tool :
1 Screw Driver Crosshead small
Procedure :
Close housing carefully – beginning on top.
Screw on base cover using the 2 crosshead
screws.
Components list
Close housing
Page 8/14
Working copy if printed