Pcb - Proceq Hygropin Service Manual & Repair Manual

Hygropin

3.2 PCB

1
2
Doc: 820 78 004E Rev: 02
© Copyright 2017, Proceq SA, CH-8603 Schwerzenbach
Service Manual & Repair Guide
Removing the PCB from the housing cover
Attention :
Before handling the electronic components of the
Hygropin be sure to wear the ESD wrist strap.
Tool :
1 Screw Driver Crosshead Small
Procedure :
Unscrew the screw that holds the PCB in place.
Unplug the 2 connectors before removing the PCB
from the housing cover.
Material :
1 Housing Cover incl. Keypad
1 PCB complete
1 Screws Crosshead small
Components list
Page 5/14
Working copy if printed