Image Defects - Pantum M6200 Series User Manual

13.3.2. Image Defects

Trouble Cause
• Toner is low.
• The print media does not meet usage
specification, such as the media is damp or
too rough.
• The resolution in the print program is set too
low, concentration setting is too low, or toner
saving mode is ticked.
The printout is
• The laser toner cartridge is damaged.
whitish or light
• The laser toner cartridge is dirty or leaks
toner.
• The laser toner cartridge is damaged.
• The print media that does not meet usage
specification is used. For example, the media
is damp or too rough.
• The feed channel is dirty.
• If toner spots appear when copying and
scanning, the platen glass may be dirty.
Toner spots
• The scanner is dirty or damaged.
• The print media that does not meet usage
specification is used. For example, the media
is damp or too rough.
• The feed channel is dirty.
• The internal part of the laser toner cartridge
is damaged.
• The reflective glass of the laser inside the
printer is dirty.
White spots
• The scanner is damaged.
• The print media that does not meet usage
specification is used. For example, the media
is damp or too rough.
• The inside of the printer is dirty.
• The laser toner cartridge is damaged.
• The internal part of the printer is damaged.
Toner comes off
Solution
• Please properly use the print
media within the specification
range.
• Set the print resolution,
concentration, or cancel ticked
toner saving mode in the
program.
• Please use the print media
within the specification range.
• Clean the feed channel.
• Clean the platen glass.
• Please use the print media
within the specification range.
• Clean the feed channel.
• Clean the reflective glass of the
laser.
• Please use the print media
within the specification range.
• Clean the inside of the printer.
137