Common Copying Setting; Image Quality; Intensity; Resizing - Pantum M6200 Series User Manual

9.4. Common copying setting

Change relevant setting with "copying setting menu" for better copying effect.
1. Press "copying key" on control panel and then press "OK key" to enter "copying setting"
interface.
2. Press "direction key" to select options and then press "OK key" to enter setting interface.
3. Press "direction key to select option to be set and press "OK key" to set option.
• The image quality, intensity, resizing and paper setting can keep valid after options
Note:
are set.
• For multipage, clone, poster, collated copy and manual dual-side setting, set
recovery mode as default setting after completing copying, switching panel key or
restarting machine.

9.4.1.Image quality

Select corresponding image quality mode for original document used in order to improve copying
effect.
There are 4 modes in total:
Automatic: default mode.
Text+ image: applicable to original text and image.
Image: applicable to original image.
Text: applicable to original text.
• The image quality mode supports "automatic" mode only after "poster" and "collated
Note:
copy" are set.

9.4.2.Intensity

Adjust deep-light copying effect by setting intensity.
Intensity includes "manual" and "automatic adjustment".
Manual adjustment: light

9.4.3.Resizing

When original document is copied, resize image copied.
The resizing includes "fixed" and "manual adjustment" and the default value is 100%.
1. Fixed resizing: 141% A5->A4、 122% A5->B5、 115% B5->A4、 97% LTR->A4、 94% A4->LTR、
86% A4->B5、81% B5->A5、70% A4->A5.
e.g.: 70% A4->A5：
dark
81