Add Printer To Macos System; Add Up The Printer Via Usb; Add Up The Printer Via Wireline Connection; Add Up The Printer Via Wireless Connection - Pantum M6200 Series User Manual

3.3. Add printer to macOS system

3.3.1. Add up the printer via USB

1. Connect the printer to computer with USB cable and then turn power on.
2. Enter the "System Preferences" – "Printers & Scanners" of computer.
button to select "Add Printer or Scanner".
3. Click
4. Select printer and then select the corresponding printer mode from the "Use" menu popping
out.
5. Click "Add".

3.3.2. Add up the printer via wireline connection

1. Turn the power of printer and computer on.
2. Connect the computer to wired network.
3. Connect the network cable to the network interface of printer, and make sure the printer is
connected to the computer network (Please refer to
4. Enter the "System Preferences" – "Printers & Scanners" of computer.
button to select "Add Printer or Scanner".
5. Click
6. Select printer and then select the corresponding printer mode from the "Use" menu popping
out.
7. Click "Add".

3.3.3. Add up the printer via wireless connection

1. Turn the power of printer and computer on.
2. Make sure the wireless network connection between computer and printer is set up.
• In case of basic structure mode, connect wireless network printer to the access point
Note：
(wireless router). Please refer to
• When using Wi-Fi hotspot mode, wireless client is directly connected with wireless
network-enabled printer. Refer to
3. Enter the "System Preferences" – "Printers & Scanners" of computer.
button to select "Add Printer or Scanner".
4. Click
5. Select printer and then select the corresponding printer mode from the "Use" menu popping
out.
6. Click "Add".
Chapter 4 for network setup).
Chapter 5.1 for connection method.
Chapter 5.2 for how to make connection.
45