Pantum M6200 Series User Manual page 64

• Encryption method:
Note：
1) None: There is no encryption method used.
2) WPA/WPA2: it is the pre-shared key (PSK) of Wi-Fi protected access which
connects wireless device and access point via TKIP or AES encryption
(WPS-Personal). The working length of WPA/WPA2 is within the PSK of 8-63
characters.
• The display password is not ticked by default; if it is ticked, all passwords input can
be seen in clear text.
• Some models can automatically match the encryption method, no manual selection
is required.
2.2 The computer is not connected to wireless network Input the SSID (case sensitive) and
password of access point (wireless router) in the interface below. Complete configuration
according to interface prompt.
• If you do not know the SSID of access point (wireless router), please click "Print
Note：
Wireless Network Information Page" to view the SSID of the needed access point
(wireless router).
• If the printer cannot be used normally after wireless network setup is finished, please
install the drive again.
52