Pantum M6200 Series User Manual page 17

5 Paper Stop
6 Feeder Tray
7 Automatic Feeder Tray
8 Power switch
• The power switch of the printer is divided into two types: "touch type" and
Note：
"self-locking type". The actual appearance of the purchased printer will prevail.
• The "touch type" power switch of the printer only has one mode, and can be reset by
short-pressing.
1) ON: short-press the power switch in the OFF state to turn on the power supply of
the printer.
2) OFF: long-pressure the power switch for about 3s in the ON state to turn off the
power supply of the printer.
• The "self-locking type" power switch of the printer has two modes: lock and
disconnect.
1) ON: short-press the power switch in the OFF state to turn on the power supply of
the printer.
2) OFF: short-press the power switch in the ON state to turn off the power supply of
the printer.
| Rear View
No. M6200/M6500 Series
Diagram
1 USB Interface
2 Network Interface
3 Power Interface
4 Rear Cover
5