Safety Measures - Heinner HSB-300RD Manual

www.heinner.com
IV. SAFETY MEASURES
1. This appliance is intended for household only.
2. Before you operate this product, Please ensure you read the instruction manual
and keep it.
3. This product is strictly prohibited operating without load or overload.
4. Do not use power other than AC 220-240V~, or there is danger of electric shock or
fire.
5. Please use the socket above 6A for single use. If you share the socket with other
electrical appliances, the wiring part of the socket may cause abnormal heat and fire.
6. Hold the power cord plug by hand, and pull the power cord plug out of the plug
socket smoothly.
7. Do not use the hard thing to crap the machine.
8. Unplug from outlet when not in use, or else may occur electric shock, leakage, fire
risk.
9. This product works continuously for 30 seconds and stops for one minute. During
the operation, if the engine is overheated, it should be shut down for about 20 minutes
to cool down for continue use.
10. Only after the cup and the knife seat are tightly screwed can be installed on the
machine seat, and the knife seat and the cup can not be separately installed on the
machine seat.
11. The cup and knife seat must be tightly screwed to avoid leakage and knife holder
fall off when the product is working.
12. The ingredients should not exceed the upper limit of the capacity of the cup
(MAX).
13. The product is provided with the overheating protection device, when serious
overload operation or abnormal use of motor, the product will automatically stop to
protect, after 30 minutes protection, if the product can not start, it need to be sent to
the company maintenance repair outlets, do not disassemble itself.
14. If the product is stuck when using, please turn off the power immediately, unplug
the power plug, remove the container as well as the material that jam the blade, and
you continue to use it after the motor is cooled.
15. The appliance is not intended for use by person (including children) with reduced
physical, sensory or mental capabilities.
16. Unplug from outlet when not in use, before putting on or taking off parts, and
before cleaning.
17. The cutting edges of the blades are very sharp, when using and cleaning it must be
carefully.
18. The product must be cleaned immediately after use.
19. The first-time to use will have a slight smoke or smell, it is a normal phenomenon,
it will disappear after a period of time.
300W, 220-240V~50/60Hz