Safety Measures - Heinner HBL-HS1000XMC Instruction Manual

www.heinner.com
IV. SAFETY MEASURES
Carefully read all instructions before operating and save for future reference.
1. Please confirm the voltage which is marked on the label is consistent with the local
supply voltage.
2. Do not connect the appliance with a timer machine, to avoid a hazard.
3. If the supply cord、plug or another parts are damaged, do not use the appliance.
4. If the supply cord is damaged, it must be replaced by the manufacturer, its service
agency or similarly qualified persons in order to avoid a hazard.
5. Do not place the appliance where the children can reach.
6. Do not operate the appliance without any guard.
7. Please always turn the control button to the 0 in order to turn off the power of the
appliance.
8. Unplug when it is not in use.
9. Do not immerse motor base in water, neither rinse it under tap water.
10. Do not push food with fingers, or other objects (like knives), always use the
enclosed pusher for feeding food.
11. Be extremely careful when handling blades and inserts, especially while
assembling and disassembling, and cleaning after use. Blades are very sharp.
12. Please always unplug the power cable before you put your finger or other objects
(like knives) in the bowl or blender.
13. Please wait till all the components stop running before unplugging the power cord
and taking off the processing bowl.
14. Do not use the parts which are produced by other manufacturer or without our
company recommend, if you use it, the warranty of the product will be invalidation.
15. Ensure the capacities shown in the Specifications section are not exceeded.
16. About the appropriate process time, please refer to the chart of the instruction
manual.
17. Please clean the parts which will touch the food thoroughly, before you use the
appliance at first time.
18. An alternative format of this instruction manual is available upon request to the
Carrefour Customer Service.
19. Care shall be taken when handling the sharp cutting blades, emptying the bowl
during cleaning.
20. Switch off the appliance and disconnect from supply before changing accessories
or approaching parts that move in use.
21. Always disconnect the appliance from the supply if it is left unattended and before
assembling, disassembling or cleaning.
1000W, 220-240V~50/60Hz