Safety Measures - Heinner HBL-1000XMC Instruction Manual

www.heinner.com
III. SAFETY MEASURES
When using this electrical appliance, basic safety precautions should always be
followed, including the following:
1. Read all instructions.
2. Before using check that the voltage indicated on the product corresponds with the
voltage of your electrical outlet.
3. Do not let cord hang on hot surface or over edge of table or counter.
4. Do not operate any appliance with a damaged cord or plug or after the appliance
malfunction or has been damaged in any manner. Return the appliance to the nearest
authorized service facility for examination, repair or adjustment.
If the supply cord is damaged ， it must be replaced by the manufacturer or its
5.
service agent or a similarly qualified person in order to avoid a hazard.
6. Close supervision is necessary when any appliance is used by or near children.
7. Avoid contacting moving parts.
8. Keep hands and utensils out of container while blending to reduce the risk of
severe injury to persons or damage to the blender. A scraper may be used but must be
used only when the blender is not running.
9. The use of attachments, including jar, jar cover, blade assembly, not recommended
or sold by manufacturer may cause fire, electric shock or injury.
10. The appliance can not be used for blending hard and dry substance, otherwise the
blade could be blunted.
11. Unplug from outlet when not in use, before putting on or taking off parts, and
before cleaning.
12. To reduce the risk of injury, never place blade assembly on motor unit without the
jar properly attached.
13. This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliances by a
person responsible for their safety. This appliance shall not be used by children. Keep
the appliance and its cord out of reach of children.
14. Do not leave the machine on unattended
15. When removing the blender from the motor unit, wait until the blades have
completely stopped.
16. Always operate blender with cover in place.
17. Always use the appliance on a secure, dry level surface.
18. Never place this appliance on or near a hot gas or an electric burner or where it
could touch a heated appliance.
19. Do not use outdoors.
1000W, 50Hz, 220-240V
13