Xylem sensus AutoRead User Manual page 76

3. Click the Meters tab, which will display the list of meters in this route.
4. Filter out just the Un-Read or Unvisited meters by clicking the check box in front of Un-
Read or Unvisited meters then clicking the
Un-read meters.
After clicking Apply, only the unread meters are displayed on the
5. Click the Select All
selected meters, as well as the total number of meters listed will appear in the lower
right corner.
Apply
button to highlight/select all of the unread meters. The number of
button. In this example we will choose
Meters
7 Additional Route Processing Options | 76
tab.