Xylem sensus AutoRead User Manual page 150

Field Protocols
Name
Read All
Time(Hours)
Read All
Time(Minutes)
Read All
Time(Seconds)
Read Type All
Reading All
Register All
Text
Reverse All
KWH
Consumption
Route All
Name
Route All
Sheet
Comment
Service All
Location
Line1
ServiceLocationLine All
2
Sequence All
Number
State All
Units of All
Measurement
Units of All
Measurement
(Numeric)
Units of All
Measurement
(Text)
Voice All
Phone
Warning HH/TRHH/
RRVE/RR
Zip All
Imp/Exp Function
Export Hour portion only of Time of reading
transaction expressed as two digit
hour.
Export Minute portion only of Time of
reading transaction expressed
as two digit value of number of
minutes.
Export Seconds portion only of Time of
reading transaction expressed
as two digit value of number of
seconds.
Export Type Code of Reading. How meter
was actually read. See chart in note
number 7 for a list of Read Types.
Export The current/new meter reading
collected by the reading device.
Imp/Exp The programmable text field from a
Sensus AMR register. Contains zero
to twenty ASCII characters.
Export Reverse kilowatt hour consumption
reported on the electric meter.
Export Name of Route in AutoRead being
exported
Imp/Exp Meter Location Notes.
Imp/Exp Can be used to specify meter
location within property
Imp/Exp Can be used to specify meter
location within property
Export The sequence of the actual order a
meter was read or noted in the field.
Imp/Exp Mailing Address State
Import The units of measurement of the
meter reading.
Export The units of measurement of the
meter reading, gallons, cubic feet...
See Note 8 for a list of numeric
value for each type of unit.
Export The units of measurement of the
meter reading. See note 8 for a list
of the text units.
Imp/Exp Voice Telephone Number
Imp/Exp Warning to operator. Appears
on HHD and VXU displays
accompanied by an audible alarm.
Imp/Exp Mailing Address Zip Code
Max
Width
2
2
2
1
15
20
8
30
40
40
40
10
2
16
2
16
10
50
9
Appendix B: Import and Export Field Names | 150
Notes
7
8
8
8