Set Up Wifi And Ethernet Connections; Connect The Fl650X Handheld Device To A Wi-Fi Network - Xylem sensus AutoRead User Manual

3. Upon completion of the installation/upgrade, you must restart your computer prior to
using AutoRead. When the computer is restarted, there should be an AutoRead icon on
the Windows desktop. You can use this shortcut icon to open the AutoRead program.

Set up Wifi and Ethernet Connections

In order to take advantage of Wifi and Ethernet connectivity, you must first configure all of
the components.

Connect the FL650x Handheld Device to a Wi-Fi Network

To use Wi-Fi, you need to be in range of a Wi-Fi access point to make a connection. To
actively look for a network connection, complete the following steps:
1. From the Home screen, turn Wi-Fi on by selecting the Wi-Fi icon. The FL6502
automatically starts scanning the area for available Wi-Fi networks. (If the Wi-Fi icon is
not on the Home screen, open the Start screen, and select
up Wi-Fi or press Start > Settings > Connections > Wireless
Getting Started. Select
Manager.)
2 Before Using AutoRead | 14
Set