Xylem sensus AutoRead User Manual page 152

Field Protocols
Name
View CI/PR
Alternate
Number
View CI/PR
Emergency
Number
View CI/PR
Modes
View CI/PR
Primary
Number
View Ring CI/PR
Timer
Work Order and Flexnet Programmer Fields
Field Protocols
Name
Communication HH/TRHH/
Device ID RR
Communication HH/TRHH/
Device RR
Manufactured
Date
Communication HH/TRHH/
Device RR
Type
Flexnet HH/TRHH/
Compensation RR
Factor
Flexnet HH/TRHH/
Endpoint RR
ID
Flexnet HH/TRHH/
Index Drive RR
Flexnet HH/TRHH/
Index Scale RR
Flexnet HH/TRHH/
Latitude RR
Imp/Exp Function
Export View Command issued to obtain the
Alternate Number that is currently
set in the MIU.
Export View Command issued to obtain the
Emergency Number that is currently
set in the MIU.
Export View command issued to obtain
the mode settings (time, error, tone,
ring, and tamper) that are current
set in the MIU.
Export View Command issued to obtain the
Primary Number that is currently set
in the MIU.
Export View command issued to obtain the
current Ring Timer setting of the
MIU.
Imp/Exp Function
Export ID number of the transmitter as
recorded in the work order.
Export Manufacture Date of transmitter as
recorded in the work order.
Export Type or model information of the
transmitter as recorded in the work
order.
Export Number between 1 and 4
used to determine pulse count
on Temperature/Pressure
compensated indexes. Entered
during programming.
Export The actual endpoint ID programmed
via the HHD.
Export Number of volume measurement
units per revolution in direct mount
or per pulse if a remote mount is
selected. May be set to 1, 2, 5, 10,
20, or 100 and is entered during
programming.
Export Hundreds of Cubic Feet, Thousands
of Cubic Feet, or Cubic Meters.
Expressed as CCF, MCF, or Cubic
Meters and is entered during
programming.
Export The latitude collected via the
programming tool at the location
programming was performed.
Max
Width
50
50
16
50
3
Max
Width
40
19
1
15
15
5
5
20
Appendix B: Import and Export Field Names | 152
Notes
Notes