Xylem sensus AutoRead User Manual page 153

Field Protocols
Name
Flexnet HH/TRHH/
Longitude RR
Flexnet HH/TRHH/
Meter 1 RR
History
Scale
Flexnet HH/TRHH/
Meter 1 ID RR
Flexnet HH/TRHH/
Meter RR
1 Initial
Reading
Flexnet HH/TRHH/
Meter RR
1 Leak
Detection
Consecutive
Reads
Flexnet HH/TRHH/
Meter RR
1 Leak
Detection
Threshold
Flexnet HH/TRHH/
Meter 1 RR
Reading
Resolution
Flexnet HH/TRHH/
Meter 1 RR
Type
Flexnet HH/TRHH/
Meter 1 RR
Units
Flexnet HH/TRHH/
Meter 2 RR
History
Scale
Flexnet HH/TRHH/
Meter 2 ID RR
Flexnet HH/TRHH/
Meter RR
2 Initial
Reading
Imp/Exp Function
Export The longitude collected via the
programming tool at the location
programming was performed.
Export Used to determine the scale and
units of the current reading and
history samples.
Export The register ID attached to Port 1 of
the transmitter as programmed by
the HHD.
Export The initial reading entered for the
register attached to Port 1 of the
transmitter during programming.
Export The consecutive number of intervals
with an increase in consumption
before a leak is flagged on Port 1
of the transmitter. The interval is
defined by the sample rate. Works in
conjunction with the Leak Detection
Threshold. Expressed as 24, 36, 48,
or 72 hours.
Export The number of units that need to
pass per interval to flag a leak on
Port 1 of the transmitter. Works in
conjunction with Leak Detection
Consecutive Reads. Expressed as
Disabled, 1 count, 2 counts, or 10
counts.
Export The resolution programmed into the
transmitter for Port 1 expressed as a
power of 10.
Export Remote mount, single switch;
or Direct mount, dual switch as
entered through the programmer for
Port 1 of the transmitter.
Export The units of measurement
programmed into the transmitter for
Port 1. Expressed as Cubic Feet,
Cubic Meters, Liters, or Gallons.
Export Used to determine the scale and
units of the current reading and
history samples.
Export The register ID attached to Port 2 of
the transmitter as programmed by
the HHD.
Export The initial reading entered for the
register attached to Port 2 of the
transmitter during programming.
Max
Width
20
15
40
15
15
15
10
30
16
15
40
15
Appendix B: Import and Export Field Names | 153
Notes