Sega MISSION: IMPOSSIBLE Owner's Manual page 96

Table of Contents

Advertisement

If a problem occurs, first check to make sure that the wiring connectors are properly connected.
TABLE 01
PROBLEM
With main switch ON there is
no activation
There is sound and lighting
but no video signal
No sound
Incorrect colour on monitor/
no picture or sound
Screen saturation and
brightness not correct
Switch and volume pot input
does not work
Start button input does not
work
Start button does not light
Stays on SEGA logo and
does not go to advertise
screen (error)
The Controller line of sight
is incorrect
Floor does not vibrate
correctly (Bass Shaker error)
Floor does not illuminate
correctly
CAUSE
Power is not supplied
Supply voltage is not correct
Circuit protector activated
Video signal connector or monitor
power connector is not properly
connected
Volume not properly adjusted
Amp Board (838-0043UK), amp
or speaker fault
Poor connection of video cable
Monitor fault
Screen not properly adjusted
Poor connection of connectors
Switch fault
Lamp failure
Invalid Security Key
CPU error
Sights are not aligned due to
changes in the surrounding
environment
Poor connection
Poor connection
Bad voltage
COUNTERMEASURE
Insert power lead all the way into
outlet
Make sure that supply voltage is
correct
Reset circuit protector/replace fuse
Check/Replace VGA/DVI Cable
Adjust volume on SW Unit (Chapter
9-1)
Adjust attract volume in Test Menu
(Chapter 9-8)
Run speaker test in Test Menu
(Chapter 9-8)
Confirm connection of video/DVI
cable
Contact point of purchase
Adjust screen settings in Test Menu
(Chapter 9-9)
Check connection to I/O Bd in Test
Menu (Chapter 9-2)
Check the connection to Game Bd in
Test Menu (Chapter 9-2)
Replace switch
Replace lamp (Chapter 13-4-2)
Contact point of purchase
Realign the sight settings using
Calibration Test (see Chapter 9-6)
Turn the power off and check the
connections to the floor
Test Bass Shaker operation (Chapter
9-5)
Turn the power off and check the
connections to the floor
Test floor lighting in Test Menu
(Chapter 9-5)
Check voltage supply
15
87

Advertisement

Table of Contents
loading

Table of Contents