Sega MISSION: IMPOSSIBLE Owner's Manual page 34

CONNECTION OF POWER AND GROUND CABLES
(Only applies where an integral earth is not present in the mains/power lead)
● Use the power supply equipped with an earth leakage breaker. Use of power
supply without such a breaker could result in fire if there is a current leakage
● Have available a securely grounded indoor ground terminal. Without proper
grounding, customers could be electrocuted and product operations might not
always be stable
● Do not expose the power cord or ground wire. If these are exposed, customers
could stumble over them, for instance, and easily damage them. Additionally,
if these lines are damaged, there could be a risk of electrical shock or short
circuit. Set these lines at locations where they will not interfere with customer
traffic, or attach covers to them
● After laying out the power cord on the floor, be sure to always protect it. If the
power cord is left exposed, it can easily be damaged, resulting in electrical
shock
1
Confirm that the main switch is at OFF
2
Fully insert the power cord connector on the side opposite the power plug into the AC unit inlet
3
Fully insert the power cord plug into the outlet
4
The power cord is laid out indoors. Protect the power
cord by attaching wire cover to it.
If ground will be established with a ground wire made
available separately, lay out the ground wire indoors and
have it protected
INLET
FUSE
MAIN SWITCH
Main switch OFF
6
25