Sega MISSION: IMPOSSIBLE Owner's Manual page 91

13-4-4 Downlight
The following procedure describes the replacement of the ASSY DOWNLIGHT [MI-6003UK].
The following procedure describes the replacement of the LED which edges the CONTROL PANEL.
1
Remove the power from the machine and disconnect the mains input connector from the wall socket.
13
2
Secure a space which allow for safe working conditions.
3
Remove the (6) fixings from around the base of each controller as shown below. Remove the BKT SUR-
OUND GUN BASE L, BKT SUROUND GUN BASE R and (2) BKT SUROUND GUN BASE BACK.
M4X40 SKT CAP BH BLK
[029-B00440-0B]
BKT SUROUND GUN BASE L
M4X16 SKT CAP BH BLK
[029-00416-0B]
4
Remove the (5) M4X40 SKT CAP BH FLK fixings from the lower section of the CONTROL PANEL
COVER and (5) M4X16 SKT CAP BH BLK fixings from the upper section.
82
PLAYER 1
[MI-1909UK]
PLAYER 2
M4X16 SKT CAP BH BLK
[029-B00416-0B]
(REAR)
BKT SUROUND GUN BASE BACK
[MI-1911UK]
BKT SUROUND GUN BASE R
[MI-1910UK]
M4X16 SKT CAP BH BLK (5)
M4X40 SKT CAP BH BLK (5)
[029-B00416-0B]
[029-B00440-0B]