Table of Contents
Advertisement
CLEANING THE COIN SELECTOR (MECHANICAL)
1
Remove and clean smears by using a soft cloth dipped in water or diluted chemical detergent and then
squeezed dry.
2
Remove the CRADLE. When removing the
retaining ring (E ring) be very careful so as not to
bend the rotary shaft.
3
Remove stain from the rotary shaft and shaft
receiving portions by wiping off with a soft cloth.
etc.
4
After wiping off as per previous step, further apply a dry cloth to completely dry the Coin Selector.
Coin Insertion Test
Once every month, when performing the Coin SW Test, simultaneously check the following:
Does the Coin Meter count satisfactorily?
Does the coin drop into the cashbox correctly?
Is the coin rejected when inserted while keeping the REJECT Button pressed down?
Insert a coin while keeping
t h e R E J E C T B u t t o n
pressed down and check if
it is rejected.
CRADLE
12
65
Advertisement
Table of Contents
