Sega MISSION: IMPOSSIBLE Owner's Manual page 38

When powering the machine on for the first time, be sure NOT to have the network
cables connected. Having the network cables connected when powering up for
the first time will cause a network malfunction and incorrect IP addresses will be
assigned
1
Apply power to the Cabinets and enter the TEST menu using the TEST SW located behind the coin door on
the credit board (on both Cabinets)
2
Select NETWORK SETTINGS > LINK PLAY. Change Setting to "ON"
3
Select NETWORK SETTINGS > CABINET ID. Assign ID 1 to the first Cabinet and ID 2 to the second
Cabinet and confirm changes. Cabinet will reboot.
4
Using a LAN (Ethernet) Cable (sold separately) connect each cabinet together via the LAN port situated on
the AC Bracket
5
Once both Cabs have entered into Game/Attract, enter Test Mode and go to NETWORK SETTINGS.
Ensure the CABINETS CONNECTED option reads "2" on both Cabinets.
6
Exit Test Mode and return to Game/Attract
LAN Cable
Connect cabs using LAN ports
on AC Brackets
AC Bracket
LAN (Ethernet) Port
LAN (Ethernet) Cable
6
29