General Settings Menu; Pairing Menu - Angelcare AC327 User Manual

IMPORTANT
• To confirm your settings, you'll always need to press the
then appear on the screen: Settings have been saved
• If you have 2 Nursery Units & 2 Sensor Pads paired with your monitor, you can only change
the settings of the viewing Nursery Unit.
• If a function icon appears in grey (grayed out) it means you are unable to use or adjust.
TEMPERATURE SETTINGS MENU
22 16
1 2

GENERAL SETTINGS MENU

3 MIN
1 2
Sleep Mode Set-Up
1
Set Sensor Pad sensitivity:
2
To ensure adequate monitoring of your
child's movements, you can adjust the
sensitivity of the Sensor Pad.
Set Nursery Unit speaker volume
3

Pairing Menu

4
10
C OFF
3 4
3 4
button. A confirmation icon will
Settings have not been saved
Set warmer temperature alarm
1
Set colder temperature alarm
2
Note: The range between the minimum and
maximum temperature can not be less than
4°C / 7°F.
Set Celsius or Fahrenheit display
3
Activate the temperature alarm
4
PAIRING MENU
1 2
Nursery Unit 1 Status
1
Nursery Unit 2 Status
2
3 Sensor Pad 1 Status
Nursery Unit and Sensor Pad Status
Icons:
Green: Connected/Paired.
Blue: Add a Nursery Unit or Sensor Pad.
Red: Remove Nursery Unit or Sensor Pad.
Confirmation process ON THE SCREEN:
Blue: ''Link'' icon animation when
pairing (Linking timeout: 60s).
Green: Successful pairing.
Red: Failed pairing, please try again.
3