Angelcare AC310 Owner's Manual
Baby video monitor
Hide thumbs
Also See for AC310:
- Quick start manual (14 pages) ,
- User manual (10 pages) ,
- Owner's manual (30 pages)
Table of Contents
Advertisement
OWNER'S MANUAL
Model AC310
Baby Video Monitor
TABLE OF CONTENTS
WARNINGS ......................................................................................................................................................................................................................2
Setup requirements .................................................................................................................................................................................................................. 3
Charging the Parent Unit (9 hours) ...................................................................................................................................................................................... 3
Setting up the Camera ............................................................................................................................................................................................................. 4
Turning on your monitor ........................................................................................................................................................................................................... 5
Getting to know your monitor ................................................................................................................................................................................................. 6
Activating and deactivating additional functions ............................................................................................................................................................ 8
Adding accessories .................................................................................................................................................................................................................13
Troubleshooting ........................................................................................................................................................................................................................13
Limited warranty.......................................................................................................................................................................................................................14
Technical specifications ........................................................................................................................................................................................................14
Advertisement
Table of Contents
Related Manuals for Angelcare AC310
Summary of Contents for Angelcare AC310
-
Page 1: Table Of Contents
OWNER’S MANUAL Model AC310 Baby Video Monitor TABLE OF CONTENTS WARNINGS ............................................2 Setup requirements ..........................................3 Charging the Parent Unit (9 hours) ...................................... 3 Setting up the Camera ..........................................4 Turning on your monitor ........................................... 5 Getting to know your monitor ......................................... 6 Activating and deactivating additional functions ................................ -
Page 2: Warnings
12.15 Object and Liquid Entry - NEVER push objects of any kind into this product through 11. The Parent Unit battery is a replaceable Li-Ion battery. Only use the Angelcare casing slots as they may touch dangerous voltage points or short out parts that could result recommended replacement battery. -
Page 3: Setup Requirements
Another reason is the Sensor Pad has not been placed under the mattress properly. conducting materials such as rings, bracelets and keys. Overcharging, short circuiting, Be sure the Sensor Pad is on a flat, firm surface with the Angelcare logo side facing up. -
Page 4: Setting Up The Camera
AC410/AC417 08/04/2016 PARENT UNIT: Volume control +/- Power indicator (on the side) Power Visual sound Rechargeable battery On/Off indicator compartment Microphone VOLUME Main Menu Navigate Down Micro USB charging port Folding stand Microphone Confirm Selection (on the side) (on rear) Navigate back Navigate Up Front Side... -
Page 5: Turning On Your Monitor
1) Slide the Camera ON/OFF switch to the ON position. 2) Press and hold the Parent Unit ON/OFF button for 2 seconds until LCD screen is turned ON. Angelcare’s logo will be shown for 1 second. The Camera connection signal strength icon will appear in the status bar. -
Page 6: Getting To Know Your Monitor
INFO BAR IMPORTANT ICONS Volume Level icons Camera displaying image and Battery Level Reception sound indicators Quality icons Temperature VOX icon alerts icons Too Cold Too Warm Out-of-Range Fully charged battery (only appears when Parent Unit is plugged in 3.1 - HOW TO SET THE DATE When activating the Parent Unit for the first time, you’ll be asked to set the date and time in order to record temperature data. - Page 7 The Angelcare monitor can be used with the pre-programmed factory settings or you can also customize your ® settings to your preference. 18°C 18°C Temperature Reports General Settings Adjust LCD Camera Settings Brightness Pan & Zoom Temperature Settings Active Camera...
-
Page 8: Activating And Deactivating Additional Functions
Temperature Monitoring: Voice Activation (VOX): VOX Sensitivity: Level 2 (of 4) Screen Saver Timer: 30 seconds LCD Brightness: Level 3 (of 5) STEP 5 - ACTIVATING AND DEACTIVATING ADDITIONAL FUNCTIONS 5.1 - TWO WAY TALK Your Parent Unit is equipped with Two Way Talk. This feature allows you to talk to baby without being in the nursery. - Page 9 TO ADJUST THE SOUND SENSITIVITY (VOX): 02:04 18°C 1) In the Camera settings, adjust the microphone sensitivity level with the up/down arrows and confirm by pressing 2) Press the down arrow until the Save icon at the bottom is highlighted in blue then Press the button to save the settings.
- Page 10 18°C 1) In the temperature settings menu, select the Camera LCD display setting menu. 2) Press to turn the LCD display mode activate/deactivate then 18°C press the down arrow once and then to turn the colour changing mode activate/deactivate. 3) Press the down arrow , the Save icon at the bottom is highlighted in blue then Press the button to save the settings.
- Page 11 MANUAL SETTING: To manually activate the Screen Saver Mode, quickly press & release the Parent Unit POWER ON/OFF button. NOTE: The LCD screen will turn black when video is in Screen Saver mode. Press any button to return to Video mode. 5.5 - TEMPERATURE MONITORING Room temperature tracking gives you insight into your little ones sleep pattern.
- Page 12 NAVIGATING TEMPERATURE REPORTS: 18°C 1) In the temperature reports, press to highlight/select the first set of arrows. Use the up/down arrows to navigate page by page. 2) Press to highlight/select the second set of arrows (double 18°C arrows). Use the up/down arrows to navigate day by day.
-
Page 13: Adding Accessories
IMPORTANT • If you have a Sensor Pad connected to your Angelcare Monitor, it can ONLY be paired with Camera 1. The alarm on the Parent Unit will only sound if Camera 1 is selected or in split view. If another Camera is selected only the Camera 1 will sound the alarm. -
Page 14: Limited Warranty
Europe: 24 channels. • 20dBm (100mW) between Camera and Parent Unit Power Supply: Hereby, Angelcare Monitors Inc., declares that this Baby Monitor is in compliance with Directive 1 included rechargeable Li-Ion battery (Parent Unit) 2014/53/EU The full text of the EU declaration... - Page 16 www.angelcarebaby.com...