Page 1
OWNER’S MANUAL Model AC320 Baby Video Monitor Model AC327 Baby Movement Monitor, with Video Model AC337 Baby Movement Monitor, with Video WARNING Keep user’s guide for future reference. Please read the warnings and safety instructions carefully before assembling & using the product.
Page 2
• Sources of vibration & movement, other than your baby’ s , can be detected by the Sensor Pad and interfere with the performance of your Angelcare monitor • The alarm will not sound if it detects movement other than your baby’ s •...
(partial 25. The baby monitor can only be used between or full), hollow frame construction mattresses and 10°C and 40°C (50°F and 104°F) water beds. Please consult Angelcare if unsure of WARNINGS AND SAFETY mattress compatibility INSTRUCTIONS - BATTERY SPECIFIC 39.
8’’ (20 cm) from all persons and must not be collocated or operating in • Be sure replacement parts are supplied by Angelcare conjunction with any other antenna or transmitter and have the same characteristics as original 46.
Unit 8 hours prior to first use Regular charging time is 4 hours 2- SETTING UP THE SENSOR PAD (ON MODEL AC327 AND AC337) 1. Remove the battery cover and insert the battery face with + face up 2. Replace the battery cover, align 2 dots and click to secure 3.
• The Sensor Pad functions with standard crib sprung and foam mattresses and not memory foam (partial or full), hollow frame construction mattresses and water beds. Please consult Angelcare if unsure of mattress compatibility. The hardboard maintains a constant pressure on the Sensor Pad, enabling it to detect the baby’s movements...
TEST THE SENSOR PAD (ON MODEL AC327 AND AC337) 1. Sources of vibration & movement other than your baby’s can be detected by the Sensor Pad and interfere with the performance of your Angelcare monitor. The alarm will not sound if it detects movement other than your baby’s 2.
5- GETTING TO KNOW YOUR MONITOR NURSERY UNIT Speaker Microphone Camera Lens Power indicator (on model AC327 & AC320) Temperature Indicator (on model AC337) Micro USB charging port Pause Sensor Pad / Pairing button Power ON/OFF Magnet for tabletop stand...
• The Pause icon in the status bar will flash sensitivity level. To save power, after 10 seconds, • On the AC327, the Nursery Unit Power indicator the sound transmission will stop if no sound is will slowly blink detected.
4 levels Nursery Unit 2 Status (the most sensitive is level 4). This means Sensor Pad 1 Status (on model AC327 that sound will only transmit based on the and AC337) level that you set...
To reactivate the Sensor Pad, simply un-pause the Sensor Pad into the first menu 6- ADDING ACCESSORIES Your Angelcare monitor allows you to add an additional Nursery Unit and Sensor Pad. Please contact your local distributor to see what is available in your country IMPORTANT: •...
Page 12
WEAK RECEPTION • Bring units closer together. • Change the position of one or both units. • Place units on a flat surface away from baby’s reach. • Recharge the Parent Unit. STATIC, DISTORTION, INTERFERENCES (FROM OTHER MONITORS, WIRELESS PHONES, WALKIE-TALKIES, ETC.) •...
Page 13
You will need to try again LOSS OF CONNECTIVITY BETWEEN THE SENSOR PAD AND THE NURSERY UNIT (ON MODELS AC327 & AC337) • If your Sensor Pad becomes un-paired from your Parent Unit, please follow the steps below to re-pair them. In...
Page 14
SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU. Angelcare® will bear the cost of repairing or replacing WE ARE NOT IN ANY WAY RESPONSIBLE FOR ANY OUTCOME the product and shipping it back to you.
Transmission between the Nursery Unit and the Sensor Pad is made on 2.4 GHz frequency for model AC327 and household waste. When the product/battery AC337.
Page 16
FCC AND IC WARNING Industry Canada (IC) – This device contains license‐exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license‐exempt RSS standard (s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil contient des émetteurs / récepteurs exemptés de licence conformes à la norme RSS d’Innovation, Sciences et Développement économique Canada. Son fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne doit pas causer d’interférences et (2) cet appareil doit accepter toute interférence, y compris les interférences pouvant entraîner un fonctionnement non souhaité...
Contact information IMPORTANT! This Angelcare® monitor is a personal care product. Please do not return this product to the store. If you have questions or need help, please call your distributor before returning this product. We, at Angelcare®, stand behind all of our products. If you are not completely satisfied or have any questions, please contact your distributor before returning this product: United States and Canada: Please contact us at: info@angelcarebaby.com...
Need help?
Do you have a question about the AC327 and is the answer not in the manual?
Questions and answers