General Settings Menu; Pairing Menu - Angelcare AC320 Owner's Manual

IMPORTANT
• To confirm your settings, you'll always need to press the
then appear on the screen: Settings have been saved
• If you have 2 Nursery Units & 2 Sensor Pads paired with your monitor, you can only change the
settings of the viewing Nursery Unit
• If a function icon appears in grey (grayed out) it means you are unable to use or adjust
TEMPERATURE SETTINGS MENU
22 16
1 2

GENERAL SETTINGS MENU

VOX
1 2
Activate Nursery Unit display
1
(on model AC337)
Set VOX sensitivity: The sensitivity of the
2
microphone is adjustable and has 4 levels
(the most sensitive is level 4). This means
that sound will only transmit based on the
level that you set
Set Sensor Pad sensitivity
3
(on model AC327 & AC337):
To ensure adequate monitoring of your
child's movements, you can adjust the
sensitivity of the Sensor Pad
Set Nursery Unit speaker volume
4

Pairing Menu

5
10
ANGE_Manuel_AC327_SE_Complet_m2.indd 10
C OFF ON
3 4 5
3 4 5
button. A confirmation icon will
Settings have not been saved
Set warmer temperature alarm
1
Set colder temperature alarm
2
Note: The range between the minimum and
maximum temperature can not be less than
4°C / 7°F.
Set Celsius or Fahrenheit display
3
Activate the temperature alarm
4
Activate the Nursery temperature
5
colour code display (on model AC337)
White: Temperature is normal
Red: Temperature is too hot
Blue: Temperature is too cold
PAIRING MENU
1 2 3
Nursery Unit 1 Status
1
Nursery Unit 2 Status
2
Sensor Pad 1 Status (on model AC327
3
and AC337)
Nursery Unit and Sensor Pad Status
Icons:
Green: Connected/Paired
Blue: Add a Nursery Unit or Sensor Pad
Red: Remove Nursery Unit or Sensor Pad
Confirmation process ON THE SCREEN:
Blue: ''Link'' icon animation when
pairing (Linking timeout: 60s)
Green: Successful pairing
Red: Failed pairing, please try again
2019-04-03 7:44 PM