General Settings Menu - Angelcare AC527 User Manual

IMPORTANT
• To confirm your settings, you'll always need to press the
appear on the screen: Settings have been saved
• If you have 2 Nursery Units & 2 Sensor Pads paired with your monitor, you can only change
the settings of the viewing Nursery Unit.
TEMPERATURE SETTINGS MENU
72 60
1 2

GENERAL SETTINGS MENU

3 MIN
1 2 3
Activate Nursery Unit display
1
Sleep Mode Set-Up
2
Set Sensor Pad sensitivity:
3
To ensure adequate monitoring of your child's
movements, you can adjust the sensitivity of
the Sensor Pad.
Set Nursery Unit speaker volume
4
Pairing Menu
5
10
C OFF ON
3 4 5
4 5
icon. A confirmation icon will then
Settings have not been saved.
Set warmer temperature alarm.
1
Set colder temperature alarm.
2
Note: The range between the minimum and
maximum temperature can not be less than
4°C / 7°F.
Set Celsius or Fahrenheit display.
3
Activate the temperature alarm.
4
Activate the Nursery temperature
5
color code display.
White: Temperature is normal.
Red: Temperature is too hot.
Blue: Temperature is too cold.
PAIRING MENU
1 2
Nursery Unit 1 Status
1
Nursery Unit 2 Status
2
Sensor Pad 1 Status
3
Nursery Unit and Sensor Pad Status Icons:
Green: Connected/Paired
Blue: Add a Nursery Unit or Sensor Pad
Red: Remove Nursery Unit or Sensor Pad
Confirmation process ON THE SCREEN:
Blue: ''Link'' icon animation when pairing
(Linking timeout: 60s)
Green: Successful pairing
Red: Failed pairing, please try again
3