Angelcare AC315 Owner's Manual
  1. Manuals
  2. Brands
  3. Angelcare Manuals
  4. Baby Monitor
  5. AC315
  6. Owner's manual

Angelcare AC315 Owner's Manual

Baby video, sound and movement monitor
Hide thumbs Also See for AC315:

Advertisement

Table of Contents

See also: Owner's Manual
OWNER'S MANUAL
Model AC315
Baby Video, Sound and
Movement Monitor
Cord Safety
Ensure the Camera is at least 1 metre away from your baby's cot.
For assistance, FAQs or guidance with your monitor
please visit our Customer Support page at angelcare.co.uk
TABLE OF CONTENTS
WARNINGS............................................................................................................................................................................... 2
Setup requirements.......................................................................................................................................................................... 3
Charging the Parent Unit (9 hours) ............................................................................................................................................4
Positioning the movement Sensor Pad ..................................................................................................................................... 5
Setting up the Camera .................................................................................................................................................................... 7
Turning on your monitor ................................................................................................................................................................ 7
Getting to know your monitor......................................................................................................................................................9
Activating and deactivating additional functions ................................................................................................................12
Adding accessories ........................................................................................................................................................................ 16
Troubleshooting ...............................................................................................................................................................................17
Limited warranty ............................................................................................................................................................................. 18
Technical specifications ................................................................................................................................................................ 18
01m5_Manuel_AC315_UK_12703.indd 1
2017-10-16 9:19 AM

Advertisement

Table of Contents
loading

Related Manuals for Angelcare AC315

Summary of Contents for Angelcare AC315

  • Page 1 Movement Monitor Cord Safety Ensure the Camera is at least 1 metre away from your baby’s cot. For assistance, FAQs or guidance with your monitor please visit our Customer Support page at angelcare.co.uk TABLE OF CONTENTS WARNINGS....................................2 Setup requirements..................................3 Charging the Parent Unit (9 hours) ............................4...

  • Page 2: Warnings

    DO NOT short circuit supply terminals. or short out parts that could result in a risk of fire or electric shock. NEVER Only use the Angelcare provided power adapter to charge the battery. spill liquid of any kind on the product.

  • Page 3: Setup Requirements

    Another reason is the Sensor Pad has not been placed under the mattress properly. 16.7 DO NOT attempt to rejuvenate the battery provided with or identified Be sure the Sensor Pad is on a flat, firm surface with the Angelcare ® logo for use with this product by heating them.

  • Page 4: Charging The Parent Unit (9 Hours)

    STEP 1 - CHARGING THE PARENT UNIT (9 HOURS) 1) Unlock the battery compartment on the rear and remove the cover. Insert the provided Battery compartment lock rechargeable battery into the compartment. Contacts of the battery and the contacts in the compartment must be aligned.

  • Page 5: Positioning The Movement Sensor Pad

    STEP 2 - POSITIONING THE MOVEMENT SENSOR PAD 2.1 - SELECT A LOCATION FOR THE CAMERA Camera can be installed on the wall (see included parts) or using the tabletop stand. Depending on the position you choose, you’ll need to remove the metal ball from the stand to wall mount Camera.
  • Page 6 Sensor Pad, enabling it to detect the baby’s movements even when the baby is at the edges of the cot. 1) Remove the mattress from the cot. 2) Place the Sensor Pad – Angelcare logo side up – on top of the hardboard. 3) Run connection pin,...

  • Page 7: Setting Up The Camera

    • The Sensor Pad is not WARNING designed for use with adults, children or infants older than STRANGULATION HAZARD 24 months. • Remove all slack from Sensor Pad Cord. • Discontinue used of the Sensor Pad when baby is older than 24 months. •...
  • Page 8 1) Press and hold the Parent Unit ON/OFF button for 2 seconds until LCD screen is turned ON. Angelcare’s logo will be shown for 1 second. The Camera connection signal strength icon will appear in the status bar. When Parent Unit is turned ON and Camera is OFF, Parent Unit will display Out-of-Range icon.

  • Page 9: Getting To Know Your Monitor

    Navigate the different Confirm a selection or setting and allows functions you to access to a quick menu The Angelcare monitor can be used with the pre-programmed factory settings or you can ® also customize your settings to your preference.
  • Page 10 1) After activating the Sensor Pad, the alarm will sound after 20 seconds. 2) Rub you hand over the mattress to confirm the alarm stops. IF THE ALARM DOES NOT SOUND MOVEMENT ALARM • If NO movement is detected after 15 seconds you will hear •...
  • Page 11 5.2 - SOUND TO ADJUST/MUTE SOUND: To mute the sound Press the Volume up / level press the Volume Volume down button down button until to adjust the sound the mute symbol is level. displayed. 5.3 - BATTERY HOW TO CHECK THE BATTERY: Unplug the adapter from the 1/4 full 1/2 full...

  • Page 12: Activating And Deactivating Additional Functions

    STEP 6 - ACTIVATING AND DEACTIVATING ADDITIONAL FUNCTIONS 6.1 - TWO WAY TALK Your Parent Unit is equipped with Two Way Talk. This feature allows you to talk to baby without being in the nursery. TO ACTIVATE TWO WAY TALK: 02:04 18°C Press the Microphone button...
  • Page 13 6.3 - ROOM TEMPERATURE DISPLAY TO ACTIVATE THE ROOM TEMPERATURE ALERT: 18°C 1) In the temperature settings menu, select the alarm settings by pressing 18°C 2) Press to switch the temperature alarm ON/OFF. 3) Press the down arrow until the Save icon at the bottom is highlighted in blue then Press the button to save the settings.
  • Page 14 TO CHANGE BETWEEN CELSIUS AND FAHRENHEIT: 18°C 1) In the temperature settings menu, select the temperature unit setting. 02:04 18°C 2) Press to switch between °C and °F. °C °F 3) Press the down arrow until the Save icon at the bottom is highlighted in blue then Press the button to save the settings.
  • Page 15 TO ACTIVATE OR DEACTIVATE MOVEMENT AND TEMPERATURE MONITORING: IMPORTANT In order to record the movement and temperature data, ensure you have set the date and time in STEPS 4.1 and 4.2. The graphing function is not available during the first 20 minutes of use as the system is collecting the first set of data that will be displayed.

  • Page 16: Adding Accessories

    2) Use the up/down arrows to decrease / increase the brightness level. STEP 7 - ADDING ACCESSORIES Your Angelcare monitor allows you to add additional Cameras. Please contact your local distributor to check availability in your country. 01m5_Manuel_AC315_UK_12703.indd 16 2017-10-16 9:19 AM...

  • Page 17: Troubleshooting

    IMPORTANT • If you have a Sensor Pad connected to your Angelcare Monitor, it can ONLY be paired with Camera 1. • You will only be able to hear audio from one camera at a time. When in split screen, the sound transmitted from the Parent Unit will be from the Camera number highlighted in the info bar.

  • Page 18: Limited Warranty

    • Make sure the movement and temperature function is activated. Refers to STEP 6.5. This warranty does not cover products and accessories which are not LIMITED WARRANTY Angelcare-branded, or any problems that result from usage that is not Angelcare ®...
  • Page 19 01m5_Manuel_AC315_UK_12703.indd 19 2017-10-16 9:19 AM...
  • Page 20 For assistance, FAQs or guidance with your monitor please visit our Customer Support page at Angelcare.co.uk www.angelcarebaby.com 01m5_Manuel_AC315_UK_12703.indd 20 2017-10-16 9:19 AM...

Table of Contents